Why should pay attention to the selection and matching of hydraulic coupling

Only the correct selection matching can give full play to the excellent function of the coupler.

Hydraulic coupling with light load start, overload protection, to reduce the impact, isolation of torsional vibration, coordination of multi power balanced synchronous driving, clutch, brake speed, flexible and many excellent functions, but these functions are excellent is the premise of the correct selection, the realization of the selection, so, is the foundation to play excellent function of hydraulic coupling, shall pay special attention to.

Only the correct selection matching can ensure the reliable and safe operation of the hydraulic coupler transmission unit.

The reliability of the hydraulic coupler transmission unit is not only related to the level of design and manufacturing, but also is related to the matching of type selection. For example, if the hydraulic coupler and Hardened reducer, due to the high speed output Hardened reducer shaft of the motor shaft is much thinner than, so if the outer drive coupling, make quality reducer coupling thin take weeks, frequent deceleration shaft broken accident. If the internal wheel drive coupling is selected and the quality of the motor bearing bearing coupling is made, the accident of the reducer's broken axis can be reduced and the reliability of the use can be improved. It can be seen that the correct selection of matching is very important for improving the reliability of the coupler and even the whole unit.

Only the correct selection matching can obtain high technical and economic benefits.

First, the purchase cost of the coupler is related to the selection and matching. The matching type is correct. The matching coupler is reasonable, economical and applicable, and the cost of the coupling is low. The second is that the cost of energy saving is related to the matching of type selection. The selected coupler can run in the best energy saving condition, then the running cost is provincial and the efficiency of energy saving is high. On the other hand, if the selection of the selection is improper, the operating cost is high and the efficiency of energy saving is poor.